Miniature bearings carry moderate radial and
thrust loads at low operating torque and provide high performance
within small envelope designs. Pacific International Bearing
offers a complete line of miniature bearings that are available
in chrome and stainless steel and Chromex 40 (subject to minimum
quantity orders) with either crown or ribbon type retainers.
Bearings are also available open or shielded, flanged or unflanged,
and with a variety of seal options to suit any engineering
need.
Ball Bearings >
Pacific International Bearing offers complete lines of bearings
for a variety of applications. Whether your application requires
extra light, light or medium duty bearings, we can supply
the best bearing for the job. We can also offer different
types of bearings to our customer who may need thinner bearings
due to space restrictions.
Super Precision Angular
Contact Bearings >
Pacific International Bearing offers two lines of angular
contact bearings, GRW and SNFA. GRW (manufactured in Germany)
holds ISO 9001 Quality Certificates and has bore sizes ranging
from 3 mm to 17 mm. SNFA (manufactured in the United Kingdom
and Italy) holds ISO 9000 Quality Certificates and has bore
sizes ranging from 6 mm – 280 mm. Both lines offer bearings
in ABEC 7 and ABEC 9.
Linear Products >
Stocking distributors for INA, NB, IKO & Rollon.
Plastic Bearings >
We carry a wide variety of plastic bearings including the
ability to produce custom plastic products. A partial list
of products include ground, unground, saffron yellow pulleys,
combined pulleys, anti acid, caustic environment, high temperature
and standard bearings with a plastic race. Common applications
for these include office furniture equipment, sliding doors,
copy machines, fax machines, printers, windows, doors, in
seawater, and high precision applications.
Mounted Units >
PIB carries a wide variety of mounted units including pillow
block units, two-bolt flange units, three-bolt flange units,
four-bolt flange units, four-bolt square piloted flange units,
four-bolt round piloted flange units
Roller Clutch Bearings >
Full Complement Bearing Construction
The full complement drawn cup bearing
combines maximum
capacity and low cost with the advantages of the drawn outer
ring.
The inward turned lips of the cup are used to mechanically
retain
the full complement of needle rollers to provide positive
radial
retention of the rollers even though it may be necessary
to remove
the shaft repeatedly during the servicing of the mechanism
employing the bearing.
Caged Bearing Construction
Caged drawn cup bearings have a steel
cage which
provides inward retention of the needle rollers. The design
provides
maximum cage strength consistent with the long life requirements.
Bearings with other cage designs are also available.
Bearings with reinforced plastic cages are for use where
operating
conditions permit.
Sealed Bearings
Drawn cup caged needle roller
bearings are offered
with integral seals. The seal lip design achieves a light
and constant
contact with the shaft throughout the range of mounting
bearing
clearances thereby ensuring positive sealing and low frictional
drag.
Sealed drawn cup bearings are intended to retain grease
or nonpressurized
oil within a bearing while also preventing contaminants
entering the raceway area.
Drawn Cup Roller Clutches
Both clutches and clutch and bearing
assemblies are successfully
applied in a wide range of commercial products where indexing,
backstopping and overrunning operations must be performed
reliably.
Drawn Cup Roller Clutches are manufactured to commercial
hardware standards and are used extensively in appliances,
business
machines, industrial and recreation equipment and a wide
range of other
applications.
Thin Section Bearings >
Thin section bearings have a combination of unique features
that make them the best choice for SME applications. Thin section
bearings are manufactured in a range of precision classes for
optimal precision and design flexibility. PIBS offers a wide
selection of Thin Section Bearings.
Custom Products >
Pacific International Bearing has helped design numerous
special bearings formany applications. Please contact us regarding
applications requiring special shapes, special lubricants,
or designs needing the use of special materials.
Precisions Rod Ends >
We stock a number of rod ends for use in a variety of applications
including precision brass, commercial sintered bronze, high
strength alloy, precision extra capacity, stainless steel
self lubricating, extra strength hevy duty shank, and aluminum
series.
Oil Seals >
Pacific International Bearings offer quality seals from Chu
Hung Oil Seals Industrial Company (manufactured in Taiwan).
They hold ISO 9001 Quality Certificates to provide top quality
oil seals. Seals come in a variety of sizes and lip designs
to suit each engineering need.
|
