Pacific International Bearing, Inc.

Bearings of the Highest Quality for the Greatest Value

Criteria For Lubricating Oil Selection

NAME	General grease	Diester grease	Silicone grease	Cup grease	Fibre grease	Mobile grease	Mixed base grease	Complex Base grease	Non-Soap Base grease
THICKENING AGENT	Li soap			Ca Soap	Na soap	Al soap	Ca+Na Soap.ect.	Li complex Soap,ect	Benton	Silica gel	Urea
LUBRICANT BASE	Mineral	Diester	Silicone	Mineral	Mineral	Mineral	Mineral	Mineral	Mineral or Synthetic oil
TEXTURE	Buttery	Fibrous or buttery		Buttery	Fibrous or Buttery	Thready or Buttery	Buttery	Fibrous or Buttery	Buttery
DROP POINT (°C)	170~190		220~260	80~100	160~180	70~90	150~180	180~300	230~
OPERATING TEMP. RANGE (°C)	-30~ +120	-50~ +130	-50~ +180	-10~ +70	0~ +110	-10~ +80	-10~ +120	-20~ +130	-10~ +150
WATER RESISTANCE	Good		Good	Poor	Good	Poor (in case of Na)	Good	Good	Good	Fair	Good
MECHANICAL STABILITY	Good		Fair	Good	Fair	Good	Good	Good	Good	Fair~poor	Good
CHARACTERISTICS	Typical all-purpose grease. Widely used in medium & small bearings. Suitable for low operating temps.		Wide operating temps. From low to high. Mainly for light loads.	Water included as a structural stabilizer. Unsuit-able for high temps.	Emulsification phenomenon occurs with water. Used with relatively high temps.	Suitable for vibration because of its good viscosity.	Suitable for large sized bearings.	Suitable for high temp. and heavy loads.	Good for high temps and heavy loads.	Poor water resistance. Suitable for high temps.	Good for high temps.

Please contact us at 800-228-8895, or at info@pibsales.com