BS200 (ISO 02) and BS Special Size bearings
are particularly suitable for precision applications with
predominantly axial loads, due to their high axial rigidity
and load capacity.
BS bearing are manufactured to class ABEC 7 with reduced
axial runout error of 2.5 mm.
This high degree of precision translates into:
- constant torque and uniform rotation even at high preload
- limited axial position error
- low operating temperature.
Similarly to the precision angular contact ball bearings
described so far, BS bearings are supplied either individually
or in sets to better satisfy a wide range of different applications.
Click on the links below to view spec sheets
of each:
Ball Screw Cartridge Units
Another effective solution for ballscrews is the use of BSDU
and BSQU cartridges, containing two and four BS200 bearings
respectively, with different arrangements, as shown, or to
specific requirements.
Cartridges can be easily assembled, and allow high precision
and rigidity. They are well sealed and lubricated for a long
life.
BSQU/1 cartridges, supplied on request, differ from standard
BSQUs in the position of the clamping flange. In this case,
they contain four BS200 in any combination.
|
GRW
Product Desc.